一，產品簡介：

漆膜磨耗儀適用于GB/T15036.2、GB/T15102、GB/T18102、GB/T4893.8、ISO7784.2標準。對漆膜耐膜性能的測試和對木材飾面耐磨性能的測試必須采用不同配置的轉盤組件和磨耗輪，請在定貨時予以說明（可選擇“漆膜配置”、“木材配置”或“兩用配置”）。轉盤轉速可在50-100r.P.m范圍內按用戶要求特殊設置（需訂貨時說明）
First, the product introduction:
The paint film abrasion meter is suitable for GB/T15036.2, GB/T15102, GB/T18102, GB/T4893.8, ISO7784.2 standards. Testing of the film's film resistance and testing of the wear resistance of the wood finish must be carried out with different configurations of the turntable assembly and the wear wheel, please specify when ordering (optional "film configuration", "wood configuration" or "optional" Dual-use configuration"). The rotation speed of the turntable can be set according to the user's requirements within the range of 50-100r.P.m (please specify when ordering)
二，產品特點：
*的磨耗工序 將待測材料放在轉盤上，兩個磨耗輪以一定壓力壓在材料上使其受磨耗。 磨耗輪隨樣件盤轉動面轉動，產生相對運動和磨耗，而轉動 (60 RPM 或 72 RPM) 過程中磨耗輪軸相對于轉盤轉軸的偏移產生滑移運動，從而磨耗材料。 面積為30平方厘米的樣件承受磨耗時，樣件表面材料受全角度顆?；蚪z織狀物磨損形成一完整的圓環。磨耗機是當前功能HAO的加速磨損試驗儀。通過改變附件可以改變試驗功能。這款耐用型儀器可以在一種物料同一點上進行重復測試，至厚約0.5"的材料破損或被磨掉。 選擇不同的磨耗輪和附件可以模擬不同的真實磨耗情況進行不同的試驗。
嚴格的控制保證可靠的結果 精心挑選的磨耗輪磨料，質量高 加在磨擦輪上的壓力以克為單位 磨耗輪穩定性經嚴格的質量控制 電子測量轉盤轉動數 真空吸塵器除磨屑。
Second, the product features:
Unique wear process The material to be tested is placed on the turntable, and the two wear wheels are pressed against the material with a certain pressure to cause wear. The wear wheel rotates with the rotating surface of the sample disc, causing relative motion and wear, while the rotation of the wear wheel (60 RPM or 72 RPM) produces a slip motion relative to the rotation of the turntable shaft, thereby damaging the material. When the sample with an area of ??30 square centimeters is subjected to wear, the surface material of the sample is worn by a full-angle particle or silk weave to form a complete ring. The wearer is currently the best performing accelerated wear tester. The test function can be changed by changing the attachment. This rugged instrument can be retested at the same point of a material, and materials up to about 0.5" thick are broken or worn away. Different wear wheels and accessories can be selected to simulate different true wear conditions for different tests.
Strict control guarantees reliable results Carefully selected grinding wheel abrasives, high quality Plus pressure on the grinding wheel in grams of wear wheel stability through strict quality control Electronic measuring turntable rotation number Vacuum cleaner in addition to wear debris.

三，技術參數：
♦ 主電動機功率：40W
♦ 修磨電動機：JX5612 220V 90W 2800r/min
♦ 轉盤轉速：0~90r/min
♦ 橡膠砂輪：50*16*13
♦ 荷重砝碼：250克 500克 750克
♦ 荷重砝碼標示重量：500克 750克 1000克
砝碼標示重量為施加壓于試件表面的重力
荷重砝碼上標示的重量=砝碼實際重量+加壓套重量250克（固定在儀器上）
例：荷重砝碼上標示的重量為500克=砝碼實際重量250克+加壓套250克
♦ 砂輪平衡砝碼：1克 2克 5克 10克 20克 （銷軸20克）
♦ 外形尺寸：主機：220*280*300（長*寬*高）
    修磨機：300*205*175（長*寬*高）
♦ 重量：15Kg
Third, technical parameters:
♦ Main motor power: 40W
♦ Grinding motor: JX5612 220V 90W 2800r/min
♦ Turntable speed: 0~90r/min
♦ Rubber wheel: 50*16*13
♦ Load weight: 250g 500g 750g
♦ Load weight weight: 500g 750g 1000g
The weight of the weight is the weight applied to the surface of the test piece.
The weight indicated on the load weight = the actual weight of the weight + the weight of the compression sleeve is 250 grams (fixed on the instrument)
Example: The weight on the load weight is 500g = the actual weight of the weight is 250g + the pressure set is 250g
♦ Grinding wheel balance weight: 1g 2g 5g 10g 20g (pin 20g)
♦ Dimensions: Main unit: 220*280*300 (length * width * height)
Grinding machine: 300*205*175 (length * width * height)
♦ Weight: 15Kg

四，工作原理：
嚴格的控制保證可靠的結果 精心挑選的磨耗輪磨料，質量高 加在磨擦輪上的壓力以克為單位 磨耗輪穩定性經嚴格的質量控制 電子測量轉盤轉動數 真空吸塵器除磨屑。
漆膜磨耗儀是由二個磨耗砂輪配置于轉盤上，當轉盤旋轉時，左側一個磨耗砂輪由外向樣板表面中心磨擦，而右側一個磨耗砂輪由樣板表面中心向外磨擦。當轉盤旋轉一周時，在樣板表面磨耗的痕跡是由互相重合，并呈X形相交的二園環組成。采用這種方式，其優點是使樣板表面各個方向都受到磨擦，克服了一個方向往復運動的耐磨儀的缺點。
Fourth, the working principle:
Strict control guarantees reliable results Carefully selected grinding wheel abrasives, high quality Plus pressure on the grinding wheel in grams of wear wheel stability through strict quality control Electronic measuring turntable rotation number Vacuum cleaner in addition to wear debris.
The paint film abrasion device is arranged on the turntable by two wear grinding wheels. When the turntable rotates, one wear wheel on the left side is rubbed from the center of the surface of the outward sample, and one wear wheel on the right side is rubbed outward from the center of the surface of the sample plate. When the turntable rotates for one round, the traces worn on the surface of the template are composed of two circular rings that coincide with each other and intersect in an X shape. In this way, the advantage is that the surface of the template is rubbed in all directions, overcoming the shortcomings of the reciprocating wearer in one direction.

五;注意事項：
⑴ 測試結束后，應切斷電源，清理儀器，將儀器罩好。
⑵ 長期不用時，應將砂輪取下放好。
⑶ 一年至二年必須檢修加油一次
Five; Note:
(1) After the test is finished, the power should be turned off, the instrument should be cleaned, and the instrument should be covered.
(2) When not in use for a long time, the grinding wheel should be removed and placed.
(3) One year to two years must be repaired once